Short-wave infrared heating lamps have the following applications in the electroplating process:Pre-plating treatment:Drying: Before electroplating, the workpiece needs to be thoroughly cleaned and dried to remove oil, moisture and impurities on the surface. Short-wave infrared heating can quickly and evenly heat the workpiece, allowing the moisture to evaporate quickly, thereby achieving the purpose of drying. Compared with traditional hot air drying or natural drying, short-wave Infrared Heating Element is more efficient, can shorten the drying time, and improve production efficiency.Preheating: For some workpieces of special materials or in specific electroplating processes, the workpiece needs to be preheated. Preheating can increase the temperature of the workpiece so that it can better react with the electroplating solution during the electroplating process, improving the quality and adhesion of the coating.Quartz Infrared Lamps Halogen Lamp can accurately control the heating temperature and heating speed, making the preheating of the workpiece more uniform and stable.Plating solution heating:Maintaining stable temperature: During the electroplating process, the temperature of the plating solution has an important influence on the quality and performance of the coating.shortwave infrared heating lamp can quickly and evenly heat the plating solution, and can accurately control the temperature to maintain the stability of the plating solution temperature. This helps to improve the efficiency of electroplating and the quality of the coating, and reduce coating defects caused by temperature fluctuations.Energy saving and consumption reduction: Compared with traditional heating methods, short-wave ir lamps has higher energy conversion efficiency, can convert more electrical energy into heat energy, and reduce energy waste. At the same time, short-wave tungsten halogen heating lamp can accurately control the temperature according to actual needs to avoid overheating, thereby achieving the purpose of energy saving and consumption reduction.Post-plating treatment:Drying: After electroplating, the workpiece needs to be dried to remove surface moisture and residual plating solution. Short-wave quartz infrared lamps can quickly and effectively dry the workpiece, so that the moisture on the surface of the workpiece evaporates quickly, and at the same time will not cause damage to the coating. Compared with traditional drying methods, short-wave infrared halogen heating lamp is faster and has better drying effects, which can improve the quality of the workpiece and production efficiency.Curing: For some special electroplating processes, such as electroplating plastics, electroplating rubber, etc., the coating needs to be cured to improve the hardness, wear resistance and corrosion resistance of the coating. Short-wave infrared heating can provide uniform and stable heat, so that the coating can be cured quickly, improving the curing effect and production efficiency.

Similar Posts