Halogen heat lamps are widely used in shoe machines, mainly in the following aspects:
Sole bondingRapid heating: During the sole bonding process, the halogen heating elements can quickly heat up and provide a suitable temperature for the activation and drying of the glue. Its fast heating speed can greatly shorten the production cycle and improve production efficiency. For example, traditional heating methods may take several minutes or even longer to reach the required temperature, while infrared heating tubes can achieve rapid heating within tens of seconds.Uniform heating: infrared heating lamps can evenly heat the sole and upper to ensure that the glue is evenly distributed and fully cured on the entire bonding surface. This can improve the bonding strength between the sole and the upper and reduce the risk of debonding. Due to the radiation characteristics of infrared rays, it can penetrate the surface of an object and transfer heat evenly to the inside, thereby achieving overall uniform heating.Precise temperature control: Through the temperature control system, the temperature of the halogen bulb can be accurately controlled to meet the heating requirements of different glues and materials. For some temperature-sensitive glues, precise temperature control can avoid overheating and cause the glue to degrade or burn, and can also prevent low temperature from affecting the curing effect of the glue. For example, some high-end shoe machines are equipped with intelligent temperature control systems that can automatically adjust the heating temperature according to different production process requirements.
Upper shapingLocal heating: During the upper shaping process, the halogen lamp can locally heat specific parts to shape the upper material according to the design requirements. For example, for the toe, heel and other parts, the position and angle of the heating tube can be adjusted to achieve precise local heating, so that these parts fit the shape of the foot better and improve the comfort and beauty of the shoes.Rapid shaping: The high heat output of the infrared heating lamp can quickly soften and shape the upper material, greatly shortening the shaping time. Compared with the traditional hot pressing shaping method, infrared heating has higher efficiency and better shaping effect. At the same time, due to the short heating time, the performance degradation and discoloration of the upper material caused by long-term heating can be reduced.Energy saving and environmental protection: The infrared halogen heating lamp has high energy utilization rate and is more energy-saving and environmentally friendly than traditional heating methods. It only heats the parts that need to be heated, reducing energy waste. In addition, the infrared heating tube does not produce harmful substances during the working process and is environmentally friendly.
Shoe material dryingEfficient drying: In the process of shoe material production, materials such as leather and fabric need to be dried.IR heating lamps can provide efficient drying heat sources, so that shoe materials can be dried quickly in a short time. Its fast drying speed can improve production efficiency and reduce production cycles. At the same time, the drying effect of infrared heating tubes is uniform, and there will be no partial incomplete drying or over-drying.Maintain material properties: The low-temperature drying characteristics of infrared heating tubes can avoid the damage of high temperature to the performance of shoe materials. For some temperature-sensitive shoe materials, such as natural leather, low-temperature drying can maintain the performance indicators of materials such as softness, air permeability and strength. In addition, infrared tungsten heat lamps can also remove moisture from shoe materials, prevent mold growth, and extend the service life of shoe materials.Strong adaptability: Halogen Heater Replacement Bulbs can adapt to different types of shoe materials and production process requirements. Whether it is leather, fabric or synthetic materials, the best drying effect can be achieved by adjusting the power and temperature of the infrared halogen bulb. At the same time,Quartz halogen heat lamps can also be used in conjunction with other equipment, such as conveyor lines, dryers, etc., to achieve automated production.In summary, the application of infrared heating lamp halogen bulbs in shoe machines has the advantages of fast heating, uniform heating, precise temperature control, energy saving and environmental protection, which can improve the efficiency and quality of shoe production and meet the requirements of different production processes.
