What are the benefits of using infrared heating lamps in car paint booths? Efficient heatinghalogen heating lamp can quickly increase the temperature of the paint layer on the car’s surface. This is because IR emmiter can directly penetrate the paint layer and be absorbed by the molecules in the primer, paint and varnish, causing the molecules to vibrate and heat up. Compared with the traditional hot air convection heating method, this heating method avoids the loss of heat during the transfer process. For example, hot air convection heating needs to heat the surrounding air first, and then transfer the heat through the contact between the air and the paint surface. This process is relatively slow. Infrared heating lamps can bring the paint layer to the temperature required for curing in a short time, usually shortening the baking time by 30% – 50%.Significant energy saving effectSince infrared heating transfers heat through radiation, the heat is transferred directly to the object that needs to be heated (car paint), rather than first heating a large amount of surrounding air like convection heating. Therefore, using halogen heating bulbs in the car paint room has higher energy efficiency. In practical applications, infrared heating lamps can save 20% – 30% of energy compared to traditional heating methods. This not only reduces the cost of baking paint, but also conforms to the concept of environmental protection and energy saving.Good heating uniformityhalogen quartz tube heater element can achieve relatively uniform heating of the car surface in the car paint room. By rationally arranging the position of the heating lamp, such as installing multiple sets of Quartz Infrared Heating Lamps on the top and sides of the paint room, the car can be illuminated from all directions. This ensures that the hood, roof, doors, body side panels and other parts of the car can receive uniform infrared radiation, so that the paint layer is evenly heated. This helps reduce paint layer defects such as orange peel, bubbles, etc. caused by local overheating or insufficient heating, greatly improving the quality of automotive paint.Improve paint qualityUniform heating makes the paint layer solidify more uniformly, thereby improving the hardness, gloss, adhesion and other properties of the paint layer. For example, under appropriate infrared heating conditions, the hardness of the paint layer can reach a higher standard, making the car surface more wear-resistant. At the same time, good adhesion can prevent the paint layer from peeling off and extend the service life of the car paint. Moreover, due to the fast heating speed, the solvent in the paint layer can evaporate quickly, which reduces the possibility of solvent remaining in the paint layer and also helps to improve the quality of the baking paint.Environmental advantagesThe efficient heating characteristics of the Heat Lamp for Car Painting Drying shorten the evaporation time of the solvent during the baking process. This means that in a shorter period of time, the organic solvents in the paint layer can be emitted to the ventilation system of the paint room for processing more quickly, reducing the long-term accumulation of organic solvents in the paint room. In addition, due to energy saving, environmental impacts such as carbon emissions caused by energy consumption are indirectly reduced, which is beneficial to environmental protection.

Similar Posts