halogen heat lamps have multiple advantages, including:High heating efficiency:Energy transfer directly: Infrared Heating Lamp to infrared radiation in the form of direct heat transfer to the object, without the need to pass through the air or other media as an intermediate transfer, reducing the loss of energy in the intermediate medium, can quickly allow the object to absorb the energy and warming up, the thermal efficiency is higher than the traditional heat conduction, heat convection heating method.High absorption rate of radiant energy: when the wavelength of infrared rays matches the absorption wavelength of the object to be heated, the object can absorb a large number of infrared rays, which makes the molecules and atoms inside the object resonate, thus rapidly increasing the temperature of the object, and further improves the efficiency of the use of energy.Fast heating speed:After power on, IR Quartz Heating Elements can reach a high power output in a short time, generally in 1-2 seconds up to about 50% of the rated power, about 2-4 seconds after the full-power operation, the rapid generation of a large number of infrared radiation, so that the object to be heated quickly warmed up, greatly shortening the heating time to meet the high requirements of some of the heating speed of the production process needs.
Good heating uniformity:Infrared rays have a certain penetrating ability, can make the internal and surface molecules of the material at the same time to absorb the radiation energy, resulting in self-heating effect, so that the object is heated uniformly as a whole, avoiding the thermal expansion and contraction due to uneven heating caused by the deformation or quality change.Through the reasonable arrangement and design of the lamp, it can achieve all-round uniform heating of the object and improve the quality and consistency of the product.Easy to control the temperature:Due to the very small thermal inertia, rapid response to temperature changes, combined with temperature controller, thyristor AC power regulator or voltage regulator and other equipment, you can achieve accurate automatic temperature control to meet the strict requirements of different processes on the temperature.The heating power and temperature can be adjusted at any time according to the actual needs, simple and convenient operation, easy to realise automatic production.
Wide applicability:It can be applied to the heating of many kinds of materials, such as rubber, plastic, glass, printed circuit board, car body, metal, casting, leather, food, etc. It can meet the heating, drying, evaporation, softening, hardening, moulding, activation, lamination, sterilisation, baking, and other processing needs of different industries.For objects with complex shapes and irregular sizes, or objects that are difficult to be heated by traditional heating methods, Halogen Lamp Replacement Parts can be adjusted to achieve effective heating by adjusting the radiation angle and distance.
Energy saving and environmental protection:In the case of achieving the same heating effect,Quartz Infrared Heating Element are more energy efficient than traditional heating methods, which can reduce energy consumption and production costs. At the same time, because it is radiant heating, it will not produce open flames, and will not cause pollution to the environment.Long service life:High-quality ir heater halogen emitters are made of high-temperature-resistant materials, such as quartz glass, etc., with good heat resistance and stability, in the case of normal use and maintenance, long service life. Generally 3000w following the continuous service life of the heating tube under rated conditions can exceed 5000 hours, 3000w above the service life of the heating tube can exceed 3000 hours, reducing the maintenance and replacement costs of the equipment.
Small size, high power:infrared replacement heating element itself is compact, easy to install and arrange, does not take up too much space, especially for places with limited space.The rated power of a single Quartz Infrared Heating Element can be more than 6000w, to meet the heating needs of different scales, can easily be made into plate heaters, hot air, oven, baking channel and other high infrared heating equipment.
