The advantages of Medium Wave Infrared Heat Lamps in the application of printing machines are mainly reflected in the following aspects: Efficient drying and curing:Rapid heating: Halogen Infrared Heating Bulb can quickly warm up in a short time to reach a higher temperature, can quickly make the printing material in the moisture, solvents, etc. volatilization, speed up the ink, paint, etc. drying and curing speed, improve the productivity of the printing machine. For example, in the use of traditional heating methods in the printing machine, to complete the drying of a print may take a few minutes, while the use of quartz heating ir lamps, the drying time can be shortened to dozens of seconds or even shorter. Deep penetration: Infrared rays have a certain penetrating ability, and can penetrate deeply into the interior of the printing material, so that the interior and surface of the material are heated at the same time, thus realizing more thorough drying and curing. This can avoid the situation of drying only on the surface but not completely dry inside, ensuring the quality and durability of the printing. Uniform heating:Uniformity of radiation: Infrared Heating Quartz Lamps for Ink Drying are able to radiate infrared rays uniformly in all directions, allowing the printing material to be heated evenly during the heating process. This is very important to ensure the color uniformity, pattern clarity and overall quality of the print. Compared with traditional heating methods, such as hot air heating, Infrared Heating Quartz Lamps can avoid localized overheating or overcooling caused by uneven flow of hot air. Precise temperature control: With the advanced temperature control system, the halogen bulb for screen painting can realize precise temperature control, and control the heating temperature within a suitable range according to different printing materials and process requirements. This helps to improve the stability and consistency of printing and reduce the defective products due to temperature fluctuation. Energy saving and consumption reduction:High energy conversion rate: the infrared heating tube converts electric energy into heat energy with high efficiency, which can generally reach more than 80%. Compared with traditional heating methods, such as resistance wire heating and hot air heating, it can utilize energy more effectively and reduce energy consumption. In the long-term production process, fast medium wave halogen bulbs can save a lot of energy costs for the enterprise. On-demand heating: Because the SK15 curing lamps for flash dryer warms up quickly and can respond quickly to temperature changes, IR heat tube for flash curing lamps can be used to carry out real-time heating control according to the working status of the printing machine and the actual demand, avoiding unnecessary energy waste. For example, when the printing machine is suspended, the heating power can be quickly reduced or shut down the heating tube, and then quickly warm up when it is working again. Good adaptability to materials:Wide material applicability: the Infrared Quartz Heating Element is suitable for a variety of printing materials, including water-based ink, solvent-based ink, paint, glue and so on. Different printing materials have different heating requirements, and the Halogen Heating Lamp can select the appropriate wavelength and power according to the characteristics and absorption spectrum of the material to realize the best heating effect. No damage to the material: infrared heating is a non-contact heating method, which will not produce mechanical pressure and friction on the printing material, avoiding the deformation of the material and abrasion caused by contact. At the same time, the temperature of infrared heating is relatively low and easy to control, which can reduce the adverse effects of high temperature on the performance of the material, such as material discoloration, aging and so on. Easy to install and maintain:Easy to install: Infrared heating tube has simple structure, small volume and light weight, which can be conveniently installed in different positions of the printing machine, such as printing table, drying channel and so on. Moreover, its installation is flexible and can be installed horizontally, vertically or inclined according to the actual demand. Low maintenance cost: the Infrared Quartz Lamp Replacement has a long service life, and the average service life can generally reach thousands of hours or even longer. In the normal use of the process, it is not easy to fail, maintenance workload is small. Even if you need to replace the heating tube, it is relatively easy to operate, maintenance costs are relatively low. Environmentally friendly and clean:No pollution emission: infrared heating process does not produce waste gas, waste water, waste residue and other pollutants, friendly to the environment. Compared with the traditional combustion heating method, to avoid the emission of carbon dioxide, carbon monoxide, nitrogen oxides and other harmful gases generated during the combustion process, in line with environmental requirements. No noise generation: Infrared Quartz Heating Element in the working process is quiet and silent, will not produce noise pollution, for the production workshop to provide a quiet working environment.

Similar Posts