What precautions should be taken when using infrared heating lamps in bottle blowing machines?SafetyPrevent burns:tungsten halogen infrared lamp generate high temperatures when working, and their surface temperatures can be as high as hundreds of degrees. Therefore, during the operation of the bottle blowing machine, it is necessary to ensure that the operator maintains a certain safe distance from the Halogen Tube Replacement. At the same time, obvious warning signs should be set around the equipment to remind people to pay attention to the danger of high temperature. In addition, for situations where equipment maintenance or debugging is required, it is necessary to wait for the Halogen Infrared Heat Lamp to cool down completely before operating to avoid accidental burns.Electrical safety: Halogen Quartz IR Heat Lamp work through electrical connections, so the safety of their electrical systems must be ensured. This includes proper grounding to prevent electric shock accidents; regularly check whether the wires are damaged or aged to avoid short circuits or fires caused by wire failures. Moreover, the power of the heating lamp is usually large, so it is necessary to ensure that the electrical equipment such as sockets and switches used can withstand the corresponding load.Installation and layoutReasonable position and angle: When installing Infared Quartz Heating Element, it is necessary to consider their position and angle to ensure that the preforms can be heated evenly. The ir halogen heat lamp should be facing the main heating area of ​​the preform, and the distance between them should be reasonably adjusted according to factors such as the power of the short wave hologen infrared lamp, the size and material of the preform. If the distance is too close, the preform may be locally overheated, deformed or damaged; if the distance is too far, it may not provide enough heat, affecting the heating efficiency.Stability and protection: The installation of the heating lamp must ensure its stability to prevent shaking or displacement during the operation of the equipment. At the same time, appropriate protective devices should be provided for the Infrared Quartz Heating Element, such as installing a protective net to prevent foreign objects from hitting the heating lamp and damaging it. In addition, the protective device can also reduce the splashing of fragments caused by the rupture of the heating lamp and protect the safety of operators and equipment.Performance and efficiencyRegular cleaning: During the use of the halogen infrared heat lamps, impurities such as dust and plastic debris will accumulate on its surface. These impurities will affect the infrared emission efficiency of the heating lamp and reduce the heating effect. Therefore, the heating lamp needs to be cleaned regularly. You can use a clean soft cloth or a special cleaning tool to gently wipe the surface of the heating lamp. Be careful to avoid damaging the coating or lamp tube of the heating lamp when cleaning.Matching equipment power: According to the production capacity of the blow molding machine and the heating requirements of the preform, choose an heating tube elements with appropriate power. If the power is too small, the preform heating time will be too long, affecting production efficiency; if the power is too large, it may cause energy waste and increase the cost and safety risks of the equipment. At the same time, during the operation of the equipment, the power of the infrared heater bulb should be reasonably adjusted according to the actual situation to achieve the best heating effect and energy utilization efficiency.Maintenance and replacementMonitoring performance changes: During use, the performance of the infrared heating lamp, such as luminous intensity, heating efficiency, etc., should be regularly monitored. If the performance of the halogen heaters emitter is found to be significantly reduced, such as reduced luminous intensity, prolonged heating time, etc., it may be that the infrared halogen ir lamp is aging or malfunctioning, and it needs to be repaired or replaced in time. Generally speaking, the service life of the infrared heating lamp will be affected by factors such as frequency of use and working environment, so a reasonable equipment maintenance plan should be established.Correct replacement operation: When it is necessary to replace the industrial infrared heat lamp, follow the correct operating steps. First, make sure that the equipment is powered off and cooled, and then carefully remove the old infrared heater industry, taking care not to damage the mounting base and connecting lines. When installing a new heater lamp, make sure it is securely installed and the electrical connections are made correctly. Finally, test it to make sure the new heater lamp is working properly.

Similar Posts